Spot electricity contactor 63A

Kuvaus

Install:

1. Turn off the power:
   • Switch off the power from the phase circuit breaker (or fuse).
2. Connect the circuit breaker to the Powerant contactor:
   • Connect the phase cable to the “L” terminal on the upper side of the contactor.
   • Connect the neutral cable to the “N” terminal on the upper side of the contactor.
3. Connect the Powerant device to the load:
   • Connect the load’s phase cable to the lower “L” terminal of the contactor.
   • You can connect the load’s neutral cable to the “N” terminal of the contactor or to the neutral busbar.
4. Turn the power on:
   • Turn the power back on from the circuit breaker.
5. Configure the device settings with your phone:
   • Set up the contactor by connecting to the WiFi network named “Powerant.”
     1. Turn the power on:
        • Turn the power back on from the circuit breaker.
     2. Configure the device settings with your phone:
        • Set up the contactor by connecting to the WiFi network named “Powerant.”
        • Use Powerant app to control the device

     Note: Electrical installations should only be performed by a qualified electrician. All relevant safety standards must be followed, and the installer is always responsible for the installation.

     New improvements:

     • Real-time control of device settings.
     • A web application with remote control from anywhere.
     • Software and security updates.
     • A “reverse” -mode which turns the device ON when electricity is expensive.

     Upcoming software updates and features:

     • Control from local network.
     • Android app and IOS app.
     • Support for 15-minute spot electricity intervals.

Works in the following countries:

Denmark (DK), Estonia (EE), Finland (FI), France (FR),  Latvia (LV), Lithuania (LT), Norway (NO) and Sweden (SE)