Kuvaus
Install:
- Turn off the power:
- Switch off the power from the phase circuit breaker (or fuse).
- Connect the circuit breaker to the Powerant contactor:
- Connect the phase cable to the “L” terminal on the upper side of the contactor.
- Connect the neutral cable to the “N” terminal on the upper side of the contactor.
- Connect the Powerant device to the load:
- Connect the load’s phase cable to the lower “L” terminal of the contactor.
- You can connect the load’s neutral cable to the “N” terminal of the contactor or to the neutral busbar.
- Turn the power on:
- Turn the power back on from the circuit breaker.
- Configure the device settings with your phone:
- Set up the contactor by connecting to the WiFi network named “Powerant.”
- Use Powerant app to control the device
Note: Electrical installations should only be performed by a qualified electrician. All relevant safety standards must be followed, and the installer is always responsible for the installation.
New improvements:
- Real-time control of device settings.
- A web application with remote control from anywhere.
- Software and security updates.
- A “reverse” -mode which turns the device ON when electricity is expensive.
Upcoming software updates and features:
- Control from local network.
- Android app and IOS app.
- Support for 15-minute spot electricity intervals.
Works in the following countries:
Denmark (DK), Estonia (EE), Finland (FI), Latvia (LV), Lithuania (LT), Norway (NO) and Sweden (SE)
Toimii kuten luvataan. Erittäin hyvää on se, että tätä voi ohjelmoida kännykällä haluamallaan tavalla milloin vain. Vesi lämpenee aina minimi hinnalla. Hyvä hinta/ laatu-suhde. Suosittelen.